RockyNH's Project 365 2013
- Thread starter RockyNH_RIP
- Start date
RockyNH_RIP
Senior Member
Day 168 - June 17th, 2013.....
Some of you may remember last week I showed an insert that we were going to mold over..
Here is a part that has been overmolded... we have to cut 4 per hundred to make sure
that the fins are not breaking (deflection is ok). Along side is another product part.
Here is an 8 frame panorama down at Horseshoe Pond...
The following shots are at the Souhegan River in Merrimack
While I was there shooting, a Heron flew right up onto the rock.
I was a ways back with the 105mm so you can see him but not up close
and personal!
Have fun shooting!
Pat in NH
Some of you may remember last week I showed an insert that we were going to mold over..
Here is a part that has been overmolded... we have to cut 4 per hundred to make sure
that the fins are not breaking (deflection is ok). Along side is another product part.
Here is an 8 frame panorama down at Horseshoe Pond...
The following shots are at the Souhegan River in Merrimack
While I was there shooting, a Heron flew right up onto the rock.
I was a ways back with the 105mm so you can see him but not up close
and personal!
Have fun shooting!
Pat in NH
RockyNH_RIP
Senior Member
Day 169 - June 18th, 2013.....
Ealy morning fog on the way into work (Horsehoe Pond)
Here is a pair from work today.. The first is a product shot..
The 2nd is one half of the tool in Maintenance (with a part in it)
Pat in NH
Ealy morning fog on the way into work (Horsehoe Pond)
Here is a pair from work today.. The first is a product shot..
The 2nd is one half of the tool in Maintenance (with a part in it)
Pat in NH
RockyNH_RIP
Senior Member
Day 170 - June 19th, 2013.....
Ok, not much today folks... had a family sitcheation crop up and needed to leave work.. Probably not do much better tomorrow!
A typical product shot.....
Samples parts bagged in sets for Validation/Capability.
(we measure 30 sets)
Parts on a at table at one of the presses in production
Happy Wednesday...
Pat in NH
Ok, not much today folks... had a family sitcheation crop up and needed to leave work.. Probably not do much better tomorrow!
A typical product shot.....
Samples parts bagged in sets for Validation/Capability.
(we measure 30 sets)
Parts on a at table at one of the presses in production
Happy Wednesday...
Pat in NH
RockyNH_RIP
Senior Member
Thanks all... I put a post up in "off topic" about the situation... not good but we expected it...
Anyway, Day 170 - June 19th, 2013 - Part 2...
Took a few pics on the deck as the wife and I were sitting and reflecting.. I had the camera looking for planes or a Cardinal... Got neither but did grab these...
2 pictures of Jingles... he is cute, for a "monster"
Snuggles with head resting on rail... watching across yard for anything to bark at!! :0
My wife in thought mode....
Enjoy, Have fun with our Hobby!
Pat in NH
Anyway, Day 170 - June 19th, 2013 - Part 2...
Took a few pics on the deck as the wife and I were sitting and reflecting.. I had the camera looking for planes or a Cardinal... Got neither but did grab these...
2 pictures of Jingles... he is cute, for a "monster"
Snuggles with head resting on rail... watching across yard for anything to bark at!! :0
My wife in thought mode....
Enjoy, Have fun with our Hobby!
Pat in NH
RockyNH_RIP
Senior Member
Day 171 - June 20th, 2013
The first 4 are work shots....
Very precise tool for measuring vertical Height..
Seal for a cap that threads on a 2 1/2 liter Carboy (we make the caps but not the bottle)
These 2 are molded plastic then inserted in a 2nd tool and "Overmolded" with the rubber material.
Took my wife to the airport for her flight to Texas.
1st is the tower and 2nd is the Southwest Terminal (she is just going through the door)
These 2 of of the parking structure...
Enjoy and Have Fun Shooting!
Pat in NH
The first 4 are work shots....
Very precise tool for measuring vertical Height..
Seal for a cap that threads on a 2 1/2 liter Carboy (we make the caps but not the bottle)
These 2 are molded plastic then inserted in a 2nd tool and "Overmolded" with the rubber material.
Took my wife to the airport for her flight to Texas.
1st is the tower and 2nd is the Southwest Terminal (she is just going through the door)
These 2 of of the parking structure...
Enjoy and Have Fun Shooting!
Pat in NH
RockyNH_RIP
Senior Member
Day 172 - June 21st, 2013
We have an assortment today... and in two parts!
Chairs at the Hardware!! It was on my way to work.. Why?? Because I could
Next is the 3rd shift Tech getting ready to hang a large mold in the press..
Parts waiting on the QC counter for inspection..
and a bird at Horsehoe Pond at lunch...
Also Horseshoe Pond.....
Then I headed back to Ponemah River .... (Part 2)
Pat in NH
We have an assortment today... and in two parts!
Chairs at the Hardware!! It was on my way to work.. Why?? Because I could
Next is the 3rd shift Tech getting ready to hang a large mold in the press..
Parts waiting on the QC counter for inspection..
and a bird at Horsehoe Pond at lunch...
Also Horseshoe Pond.....
Then I headed back to Ponemah River .... (Part 2)
Pat in NH
RockyNH_RIP
Senior Member
Day 172 - June 21st, 2013 - Part 2..
I got down to the river, did an HDR of the Fire Station and prepared to take some River shots...
1st is the small rapids... then up from below flew the Blue Heron!!!
r
Not the greatest... had a 105 intead of my 300.. never adjusted any settings (no time)
and no focus adjustments, I just shot... It was exciting in spide of mediocre pics.
Have fun shooting!! I am!!
Pat in NH
I got down to the river, did an HDR of the Fire Station and prepared to take some River shots...
1st is the small rapids... then up from below flew the Blue Heron!!!
r
Not the greatest... had a 105 intead of my 300.. never adjusted any settings (no time)
and no focus adjustments, I just shot... It was exciting in spide of mediocre pics.
Have fun shooting!! I am!!
Pat in NH
Michael J.
Senior Member
This is my favorite today. It shows the live of a river.
Day 172 - June 21st, 2013
We have an assortment today... and in two parts!
Chairs at the Hardware!! It was on my way to work.. Why?? Because I could
View attachment 41428
Pat in NH
I tried to do this a few months back. Yours came out much better.
RockyNH_RIP
Senior Member
Kevin, thanks for your thoughts... I would agree that the absence of labels would make it a "cleaner". On the other hand, it actually empahasizes my intent of stacks of chairs for sale!
(IMO) It is so nice that everyone's view of a photo is different. I like hearing comments like this that indicate how others actually view the image and the fact that we can discuss that... Pat in NH
RockyNH_RIP
Senior Member
Thank you Marilynne! It was 5:45 am and I saw the chairs as a drove past the hardware... I saw the image in my mind, colors & stacks so at the next intersection, flipped a u-turn, went back and captured it. Took 2 shots through the open car window then u-turned again and went on to work.
Pat in NH
Thank you Marilynne! It was 5:45 am and I saw the chairs as a drove past the hardware... I saw the image in my mind, colors & stacks so at the next intersection, flipped a u-turn, went back and captured it. Took 2 shots through the open car window then u-turned again and went on to work.
Pat in NH
We were on our bikes and the traffic on US 1 was pretty heavy, also, there were cars parked curbside. Couldn't get a good angle from the sidewalk.
RockyNH_RIP
Senior Member
That makes a big difference... At the time I went by, no traffic and only one car in the lot (the owner) That goes a long ways towards creating a clean full frame shot. I have had many like you, I see the shot in my mind but cannot get a good image for all the other "stuff"
Pat in NH
RockyNH_RIP
Senior Member
Day 173 - June 22nd, 2013
Today, we (Rolling Thunder) dedicated a POW/MIA Chair at Holman Stadium in Nashua. Members from MA & NH attended. This chair is in remembrance of those who never returned home after all wars. It will remain empty for eternity... All of todays shots are of that event.
Staging location, Joe the president of NH1, Steve, the Quartermaster, showing our vests..
The main group coming into the staging area... Led by road caotain (TooTall) and Doc who is currently our Laision to Rolling Thunder National. (I will let you guess who is TooTall)
My Ural and "Harley", the Riding Dog
The full group that road today... this was just before we took the field and road around the warning track around the entire field. And of course, the plaque that is with the Chair.
Joe D, President of MA1 at the Chair... and the NH State VFW Vice Commander
Joe, president NH1.... and the Mayor of Nashua (who cut the ribbon)
It was a great day.... I am a former President of this chapter and also was a Director for National for 6 years.
Needless to say, I am proud of these guys! and girls!
Pat in NH
Today, we (Rolling Thunder) dedicated a POW/MIA Chair at Holman Stadium in Nashua. Members from MA & NH attended. This chair is in remembrance of those who never returned home after all wars. It will remain empty for eternity... All of todays shots are of that event.
Staging location, Joe the president of NH1, Steve, the Quartermaster, showing our vests..
The main group coming into the staging area... Led by road caotain (TooTall) and Doc who is currently our Laision to Rolling Thunder National. (I will let you guess who is TooTall)
My Ural and "Harley", the Riding Dog
The full group that road today... this was just before we took the field and road around the warning track around the entire field. And of course, the plaque that is with the Chair.
Joe D, President of MA1 at the Chair... and the NH State VFW Vice Commander
Joe, president NH1.... and the Mayor of Nashua (who cut the ribbon)
It was a great day.... I am a former President of this chapter and also was a Director for National for 6 years.
Needless to say, I am proud of these guys! and girls!
Pat in NH
Last edited:
RockyNH_RIP
Senior Member
Day 174 - June 23rd, 2013
Heading out on the motorcycle in an hour and be gone all day.. (going to the western part of the state, vis MA to get a hot dog!)
Here is a couple quick daileys from my morning coffee...
some type of mold on a wood chip pile and my elusive Cardinal.. he stays just out range (even with my 300mm)
Have a great day, I will check in tonight when I get home...
Pat in NH
Heading out on the motorcycle in an hour and be gone all day.. (going to the western part of the state, vis MA to get a hot dog!)
Here is a couple quick daileys from my morning coffee...
some type of mold on a wood chip pile and my elusive Cardinal.. he stays just out range (even with my 300mm)
Have a great day, I will check in tonight when I get home...
Pat in NH