Vivitar Series 1 AF 100-400mm 4.5-6.7 Lens on D3200

Pete6

New member
First post here. I have had Nikons since the 1970s. I have a D3200 and just bought a Vivitar Series 1 AF 100-400mm 4.5-6.7 Lens. The camera screen shows, "Lock lens aperture ring at minimum aperture" That is f22 for this lens and it has a switch on the lens to lock it. I get the dreaded fEE error message and cannot get rif of it. I have removed the battery and fitted / removed the lens several time. The camera works with my other AF-S lenses perfectly. Note please that this is and AF lens. I never expected the zoom or autofocus to work with this lens as it is an AF variant but it would be nice to take phiotos with it. The lens has been tried in all modes M, A, S, P and both auto modes. All give the above message on screen and fEE in the viewfinder. I even have an old 500mm f8 mirror lens that works manually.

What am I doing wrong here? All help gratefully received.
 

BF Hammer

Senior Member
Is the lens a F-mount with the CPU connector pins? Is a mount adapter in use here?

3rd party gear from low-end brands can be very problematic. Like it or not, Vivitar is a well-known cheap gear brand. I have had that error from a Tamron 1.4x multiplier. Worked great on a D80 but would not work on the D7000 I traded up to with the same lenses.
 

Pete6

New member
Thanks for your reply. The lens is an F mount. No mount adapter is used. This is a Vivitar original as far as I can see and tell. I agree with you, Vivitar is a well known cheap maker of not that great lenses, It was that way back in the late 1960s when I got my first Praktika Nova 35mm SLR. I was expecting the lens to at least to give me manual focus and zooming and to have automatic aperture control.

Is there a way to get around the fEE error? Unless I can get around this, I cannot take any pictures with this lens on my camera. If I cannot the lens will go back on eBay. Help!
IMG20260715193335.jpg
 

BF Hammer

Senior Member
Count those CPU pins on the Vivitar lens and then compare to your other lenses that work. I think you will notice a large difference. It may have been compatible with earlier generation bodies at the time it was built, but then became incompatible by changes to the CPU pin setup over time.

And it's a screw-drive AF system also, which means it could only be used as a manual focus lens on your D3200 anyhow. But the CPU pins also communicate metering information, not just focus information.

Now I notice there is no feeler-lever for activating the f-stop visible. I say that lens is not for you.
 
Last edited:

Pete6

New member
Taking what you said in order, yes, obviously there are less pins. The Vivitar lens has 5 and my other lenses have 10. Yup this lens will do less. The screw AF body driven motor system is clearly not going to work on the D3200 body which does not have an internal motor. I knew that when I bought the lens. I started out without AF so figured I could manually focus. Both manual focus and zoom work fine. I am OK with that.

The aperture lever is, in fact there on the lens and it works but it was not visible in my picture. My bad.

All that said, this lens should at least take pictures on my body. It will be a bit like using my old Nikon F (but not so heavy). The Vivitar only cost me $65 delivered so I am not out a lot and anyway I can return it for a refund.

What I really wanted was a NIKKOR AF-S 80-400mm f/4.5-5.6 VR but these are 10 times the price of what I paid even used. I may just have to stick my hand in my pocket and buy one though.

Now, if you or anyone else here knows how to get rid of the fEE error in my viewfinder I would be most grateful before I go and spend more money. Thanks.
 

BF Hammer

Senior Member
The error is still there after removing the lens? I landfilled a D80 I had infrared-converted when it did that. It is common for a failure of the AF system.

Remove your battery and memory card. Then with the battery out, turn on the power switch and hold the shutter release down for a full minute. We are trying to discharge any capacitor holding a charge inside and hopefully reset the memory state. Then reassemble with a known good lens and hope.
 
Top