RON's A ROUND TUIT THREAD

wthorson

Senior Member
Woodworking projects seem to be consuming all my time recently. This is a porch being built with a new product called Boral which is composed of coal ash residue and is supposedly


View attachment 163400a green product. This porch is now ready for paint, which i understand will be Cherokee Red, one of Frank Lloyd Wright's favorite colors. beforeView attachment 163399

This is very nice. woodworking. When are you free to come and do a porch for me? LOL Is this a Frank Lloyd Wright house?
 

RON_RIP

Senior Member
Your Cannas look really great, nice and green. Mine are just peaking out of the ground. I am watching them closely, and excited to see the growth.
We have been fortunate this year to have a lot of rain and I haven't even had to water them so far. When we get blossoms we shall both photograph them and have a little friendly competition to see who can post the nicest photo. Are you in?
 

RON_RIP

Senior Member
This is very nice. woodworking. When are you free to come and do a porch for me? LOL Is this a Frank Lloyd Wright house?
Tell me when! The house is a very typical unassuming American four-square. At one time it had wooden posts and balustrades which probably fell into disrepair and were replaced by the ugly fake wrought iron posts and rails. The homeowner wanted it restored to it's more original look and that is what we attempted to do. Watch my post this evening and you will see the before and after front porch which we completed just today.
 

RON_RIP

Senior Member
As promised, the front porch of the same house
before _AAA4090 - Version 2.jpg

and afterFullSizeRender - Version 2.jpgThis one taken with my IPhone. I threw in the finger just for comic relief.
 

RON_RIP

Senior Member
Thanks Marilynne. These things seem to come in waves. I have one more porch to repair and will possibly bid on another soon. They are suppose to start painting this porch soon and I will post more photos when it is completed. Will probably do ad posters for the lumber yard to help promote this new product.
 

RON_RIP

Senior Member
Off to the David Lawrence Convention Center today for an International Woodturning symposium. Awesome pieces on display _AAA5394 - Version 2.jpg

and bowls



of all shapes and sizes_AAA5396 - Version 2.jpg and how about a hat buckaroos._AAA5407 - Version 2.jpg

or something more artful_AAA5422 - Version 2.jpg

Or one of my favorites


_AAA5425 - Version 2.jpg

The whole show was amazing and is rekindling my desire to start turning again; It is bad enough to suffer from NAS but i also suffer from the desire to own and operate expensive woodworking equipment and tools and I see a new mini-lathe on the horizon.
 

Marilynne

Administrator
Staff member
Super Mod
Contributor
Funny you should mention wanting to turn again Ron. I told Chris the other day, he has to retrain me so I can make some more pens.
 

RON_RIP

Senior Member
It's just like riding a bicycle @Marilynne, you can pick it back up in no time. Good rainy day hobby for you. My problem is my lathe is gigantic and only suitable for large projects. I need a mini or midi lathe to do smaller objects. Unfortunately they all seem to be made in the PRC today and I will not buy products from there. Have to hunt around for an older small lathe that I can convert.
 

Marilynne

Administrator
Staff member
Super Mod
Contributor
My Jet mini lathe is ten years old. It's been over five years since I turned anything.

Chris has three lathes. He refurbished and converted a Logan (1960's vintage). He also has a South Bend (1950's vintage) and a metal turning lathe which have never been used. They take up lots of space!!!
 

RON_RIP

Senior Member
What I admire about lathes is that they do not ctake up nearly much floor space as other woodworking tools and you can often take a project from start to finish on a lathe without resorting to other tools.
 

wthorson

Senior Member
We have been fortunate this year to have a lot of rain and I haven't even had to water them so far. When we get blossoms we shall both photograph them and have a little friendly competition to see who can post the nicest photo. Are you in?
Yep, I'm in. Mine are looking good they have leaves on them now. They are such a pretty green. I can't wait for the blossoms.
 

RON_RIP

Senior Member
Visited 3 Shaker Villages on the way to New Hampshire. Of course the Shakers are well known for their furniture and with good reason. Their unique and simple style may well be the only truly American furniture style. And the building of their furniture was only another form of worship to them as was all the works of their hand. A few examples

A Shaker bed





_AAA5475 - Version 2.jpg a Shaker bedstead

A Cobbler's bench_AAA5481 - Version 2.jpg

Baskets_AAA5482 - Version 2.jpg

And a cupboard/chest that I call pure Shaker_AAA5516 - Version 2.jpg
 

Attachments

  • _AAA5478 - Version 2.jpg
    _AAA5478 - Version 2.jpg
    166.4 KB · Views: 61

RON_RIP

Senior Member
A few more Shaker buildings_AAA5673 - Version 2.jpgThis building is located at Lebanon New York

this building is located at Canterbury Village in New Hampshire and is in fact, a schoolhouse_AAA5546 - Version 2.jpg
 

RON_RIP

Senior Member
Amongst my favorite Shakers buildings are the Meetinghouses. Since their design was proscribed by the Central Ministry they all tend to be more or less the same. The overall design is very well balanced and their interiors served the needs of Shaker worship exactly._AAA5515 - Version 2.jpg This one is located at Hancock.
 

RON_RIP

Senior Member
Got to spend an hour at Phipps Conservatory yesterday and was able to continue testing my 60mm micro. I have come to conclude that it does better if shot in manual focus,_AAA5698 - Version 2.jpg

White Lily_AAA5713 - Version 2.jpg

Of course everybody likes to hang out at the Phipps. You just never know who you'll run into_AAA5714.jpg

and finally this curiosity. I only can guess that the shape and color of this leaf is meant to attract butterflies._AAA5716 - Version 2.jpg
 

wthorson

Senior Member
Got to spend an hour at Phipps Conservatory yesterday and was able to continue testing my 60mm micro. I have come to conclude that it does better if shot in manual focus,View attachment 169352

White LilyView attachment 169353

Of course everybody likes to hang out at the Phipps. You just never know who you'll run intoView attachment 169354

and finally this curiosity. I only can guess that the shape and color of this leaf is meant to attract butterflies.View attachment 169355
Ron, Superb job with the 60mm macro :eek:
 

RON_RIP

Senior Member
Thanks Wendy. You have to have the focus exactly where you want it to be before you press the shutter. This lens is a little unforgiving in that regard.
 
Top