My Rokinon 135 (manual lens) and my 50mm 1:1.8 D lens will not function on one of my D500. I have 2
Both cameras have the same firmware C 1:40
There is a differance in the LD 2.018 to 2.017 but I don't think this is the problem.
The settings have been checked and the only difference is when the manual lens are mounted the setting F3 (shutter spd and aperture lock) is shaded. That only occurs in the non working camera.Both of those settings are the same when checked with working lens.
I have cleaned the contacts.
Thank you
Both cameras have the same firmware C 1:40
There is a differance in the LD 2.018 to 2.017 but I don't think this is the problem.
The settings have been checked and the only difference is when the manual lens are mounted the setting F3 (shutter spd and aperture lock) is shaded. That only occurs in the non working camera.Both of those settings are the same when checked with working lens.
I have cleaned the contacts.
Thank you