Search results

Day 172 - June 21st, 2013 We have an assortment today... and in two parts! Chairs at the Hardware!! It was on my way to work.. Why?? Because I could :) Next is the 3rd shift Tech getting ready to hang a large mold in the press.. Parts waiting on the QC counter for inspection.. and...

At lunch today I took this HDR.... Enjoy the shooting! Pat in NH

Here is my 3rd and Final Entry Enjoy the Challenge! Good luck to all the contestants, so many great entries... Tough month for the Judges!! Pat in NH

Here is my 2nd entry.... Enjoy... Have fun with the Challenge! Pat in NH

Day 171 - June 20th, 2013 The first 4 are work shots.... Very precise tool for measuring vertical Height.. Seal for a cap that threads on a 2 1/2 liter Carboy (we make the caps but not the bottle) These 2 are molded plastic then inserted in a 2nd tool and "Overmolded" with the rubber...

Thanks all... I put a post up in "off topic" about the situation... not good but we expected it... Anyway, Day 170 - June 19th, 2013 - Part 2... Took a few pics on the deck as the wife and I were sitting and reflecting.. I had the camera looking for planes or a Cardinal... Got...

Here is one from my deck today..... Have fun shooting folks... Pat in NH

I made a comment about leaving work for a "situation" earlier and did not want to muddle up the photo forums. "Off Topic" is perfect as this is exactly that... We got the call at 4:00am this morning that my wife's mom passed away. Her brother called (they are in Texas). I went into work...

Day 170 - June 19th, 2013..... Ok, not much today folks... had a family sitcheation crop up and needed to leave work.. Probably not do much better tomorrow! :) A typical product shot..... Samples parts bagged in sets for Validation/Capability. (we measure 30 sets) Parts on a at...

Day 169 - June 18th, 2013..... Ealy morning fog on the way into work (Horsehoe Pond) Here is a pair from work today.. The first is a product shot.. The 2nd is one half of the tool in Maintenance (with a part in it) Pat in NH

Here are my latest HDR shots, both taken today at my lunch break... The first is a 3 shot HDR, bracketed 1.0 - Subject - Horseshoe Pond Here is a 5 frame HDR, 1.0 EV, Souhegan River that is featured in my 365 today. Have a great day everyone... Pat in NH

Day 168 - June 17th, 2013..... Some of you may remember last week I showed an insert that we were going to mold over.. Here is a part that has been overmolded... we have to cut 4 per hundred to make sure that the fins are not breaking (deflection is ok). Along side is another product...

These were from today, outside a museum we visited... Have fun shooting.... Pat in NH

Day 167 - June 16th, 2013..... Happy Fathers Day! Today was a nice day... Coffee out on the deck... processed a bunch of photos for 2 other shoots I did. We took a ride to a museum and I did some steaks on the grill for dinner... With Coffee... a robin in the trees... Jingles:)...

Here is one that I took recently.... Have Fun shooting with your D5100 Pat in NH

Day 166 - June 15th, 2013..... Ok, I am early today!! Have the day off and took a few pics out back over coffee... Posting now as we are taking the dogs over to the dog park in a few... Planned another museum outing today but will delay that until tomorrow as they have a kids event there...

Day 165 - June 14th, 2013..... Yippee!!! Rains stopped late this morning... supposed to be sunny for the weekend... 7 Shot panorama in the back bay at work (portrait orientation) 1st is a machine to insert 23 threaded inserts into the plastic case (for circuit boards etc) 2nd is some...

When Moab posted this earlier, I was at work... so I tried it and it worked just fine.. Now that I am home... here are the 3 shots into the QC Lab The first was at 4850, 2nd was adjusted to 3450K, 3rd was 6850K In LR, if I set to Auto, they go to 4500 for reference. Again, thanks...

Re: Faymus Media Photo Challenge #6 "Winners Battle Round #1" 4 Part Contest! Ok, here is what I was working on before I fuddled the on my 7100... anyway, fixed that now, operator error but the damage is done.. these pics were taken in 2011 (according to Exif) (in reality, 6/9/13) Anyway...

Day 163 - June 12th, 2013..... Rains again, gonna get some heavy overnight! Staring with a product shot and then a mold plate with a part from it. (I do not know if PINK is the intended color, that was just a sample) Middle plate of a tool, all of those pins are called KO, or Knockout...