RockyNH's Project 365 2013

Marilynne

Marilynne

Administrator
Staff member
Super Mod
Contributor
RockyNH said:
... I already did a small one with shots for a web site and I am in the running for a small catalog job of machined plastic parts. They are narrowing it down to 2 (I think they had 4 - 3 before me but a friend plugged me so they gave me a look) and if I am in still, they will provide 3 samples to each to photograph and select he/she who's images they like best.

These are not big $$ jobs but all part of my learning.... and I am having fun!

Pat in NH
Click to expand...

Congrats on the website job and hope you get the catalog job. You deserve it.
 
G

grandpaw

Senior Member
Pat I think you are on your way to picking up a lot of product photography work. You keep taking the pictures and showing them around and I expect good things to happen. I think there is a saying that goes something like "Success is where preparation meets opportunity". I think you are well on your way.
 
RockyNH_RIP

RockyNH_RIP

Senior Member
grandpaw said:
Pat I think you are on your way to picking up a lot of product photography work. You keep taking the pictures and showing them around and I expect good things to happen. I think there is a saying that goes something like "Success is where preparation meets opportunity". I think you are well on your way.
Click to expand...

Jeff, thank you! You have been very supportive of that aspect of my work for a while. I appreciate your support and encouragement.

Pat in NH
 
RockyNH_RIP

RockyNH_RIP

Senior Member
Day 326 - November 22th, 2013

Discouraging Photo day... rain, Rain and More, grey, dreary and just depressing... I was hoping it would clear later but...
Took a few extra shots at work...


Gages on Surface Plate in QC... 3rd shift shift inspector, inspecting work in process on production floor (should have angled so box rack was not behind her head..)

DSC_5599.jpg DSC_5601.jpg


Operator (3rd shift) at one of our 2 500 Ton Injection molding presses! Gearing in an unscrewing mold...

DSC_5602.jpg DSC_5614.jpg


These 2 product shots were in a dark office... shot both at ISO 3200

DSC_5610.jpg DSC_5608.jpg


Will try and get something outdoors later...

Pat in NH
 
RockyNH_RIP

RockyNH_RIP

Senior Member
Day 326 - November 22th, 2013...... Bonus Round!! :)

Ok, not much of a bonus... I went out at break... gray, misty rain... I struggled to get a couple shots outdoors.. I focused on rain droplets!

DSC_5616.jpg



DSC_5626.jpg



DSC_5620.jpg



DSC_5623-Edit.jpg




DSC_5629.jpg



DSC_5628.jpg



Pat in NH
 
RockyNH_RIP

RockyNH_RIP

Senior Member
Day 327 - November 23th, 2013

Today was actually a nice day... Clear with sun and Temps made it to 40's (F) .. Tomorrow it is only going to be 25 F ( -4 C)

Took a run down to the Merrimack River.....

Bridge across the river between Nashua (left) and Hudson where I live....

DSC_5644.jpg



Grafitti on the Nashua side...

DSC_5643.jpg



5 shot HDR from under the bridge on the Nashua side....
(I tried a couple looking under the bridge and downriver but they were not any good..)

DSC_5635_6_7_8_9_tonemapped.jpg



Flag across the bridge road (by the skateboard park) taken from where I was parked....

DSC_5645.jpg



Enjoy your day and get out and make some memories~! :)

Pat in NH
 
RockyNH_RIP

RockyNH_RIP

Senior Member
Day 328 - November 24th, 2013

Got our first snow last night... just a dusting but it stuck... I limited my pictures today to a couple around the house as I am getting camera gear, ham radio gear plus clothes etc ready for my drive to Michigan... as such, staying around the house..

These 1st too were at 7am, ISO 640... dusting on the back deck and diggie paws!! :)

DSC_5650.jpg DSC_5651.jpg


these were a tad later (10am) but still at 640 as the meathead behind the lens did not reset!! :)
Down the driveway and a snow dusted stump off in the sunlight through the trees...

DSC_5655.jpg DSC_5654.jpg

Have a great day....

Pat in NH
 
RockyNH_RIP

RockyNH_RIP

Senior Member
Day 329 - November 25th, 2013

Happy Monday!! My last work day... Leave in the morning for Thanksgiving in Michigan... Pics today are a tad lame as I had so little time..

Looking down the row of "bins" in QC... each cubby represents one of our molding machines and holds the folders of prints, instructions and samples...


DSC_5661.jpg



Outside QC this morning... Lots of parts in final to be signed off from the weekend shift.

DSC_5663.jpg



Looking over the north side of Horseshoe... thin frozen layer...

DSC_5667.jpg



The next 2 photo's are the ice and leaves and bubbles etc... of a freezing Horseshoe Pond!

DSC_5664.jpg




DSC_5666.jpg



That will be it for a week... I will be taking my dailey pics during my travels and time in Michigan. I just will
not be able to process and upload until I get back... I will catch up!! :)

If anyone wants to play with their computer, the following link is to the SPOT tracker I will have will me. It will show my locations
approximately every 10 minutes from when I leave here until I arrive at my hotel in Michigan. You also can track me on my return Sunday.

I have this setup primarily for family and friends, normally when I traveling via motorcycle. The family is also able this weekend to track my progress
and arrival back home in Michigan. (note: you can see the map and display now but the actual tracking pings will not begin until tomorrow)

https://spotwalla.com/tripViewer.php?id=851d528760ea60954

Anyway, just thought some might like to check it out and see the technology for travelers... especially those of us who travel distances to remote areas alone..

I will check in over the holiday but will likely not post much... Have fun and those of my friends in the US, Happy Thanksgiving!


Pat in NH
 
RockyNH_RIP

RockyNH_RIP

Senior Member
Happy Sunday Everyone... I just got home an hour ago, 15 hours on the road... Great time with Family and friends... I have like 6 days (7 counting tomorrow) of pics for my 365 to get caught up!!!

Missed the forum interaction, glad to be back!

Pat in NH
 
Top