IBIS Rattle

Neilbus3

New member
I recently acquired a used Z7 ii.

The problem I'm having is that IBIS rattles continuously and loudly while shooting (unless I disable it) for no apparent reason, which causes image camera shake . The end results being a blurred shaky picture. If I switch it off then everything's fine apart from the fact I no longer have image stabilization.

I'm using a Nikon Nikkor AF-S 35mm f 1.8G ED FX prime lens with a used Nikon FT Z II Mount Adapter. So it may be the lens is incompatible, the adapter, or the IBIS just not working properly or I'm using the wrong settings. I'm hoping someone out there recognizes this problem,as I've been unable to find advice elsewhere.

Thanks in advance. 👍🙂
 

Woodyg3

Senior Member
Contributor
Do you have another lens you can try, or one you could borrow for a few minutes? That would at least rule out the lens as the problem.
 
Top