Help with panoramic shot printing pls

X

xicaque

Senior Member
I have this pano that I need an actual print to be 18 ht x 36 inches long. I am new at this so please explain it to me on easy terms. I have ps cs 5.1.
When I load my image on ps, under image menu, the size shows width 8648 pixels width by 3912 pixels height.
Document size shows width 36.033 inches by 16.3 inches ht with a resolution if 240 pixels/inch.

I am fairly new at ps. Please help me get my actual print to be the size I want. I will send this file to nationsphotolab when ready.

Is there a link on how to get what I want? Or can I get instructions from you helpful members?

Thanks!!
 
P

pedroj

Senior Member
I usually select crop then up the top two boxes with inches marked in them set them to 36x18 then run the crop tool around the part of the pic I want...

I would also set the resolution at 300...
 
Ijustwant1

Ijustwant1

Senior Member
Hi , in PS go to Image.... Image Size...and deselect *Constrain Proportions*... then change its size to what you want! and change the resolution to 300ppi ! I hope this is helpful to you ! :cool:
 
Last edited:
Top