Federico-Nov
Senior Member
Dear all
Following your advices I bought two Yangnuo IV speadlights and a Godox 300W Strobe.
I borrowed some metallic objects from an industrial designer friend of mine (brushed or polished anodized aluminum) and did some practice.
I had a rough time, specially with the stool that is polished and reflect everything in the surrounding.
Every objetc would have required more study and attempts. I need a lot of practise.
Here some results – straight from camera in JPG with no post production (Except the first stool pic that I turned in BW)
I generally used all three lights, 1/200 sec, f8, ISO 100
I mixed also long exposure with flashes to make the lighted buld visible.
I will apreciate any feedback
Following your advices I bought two Yangnuo IV speadlights and a Godox 300W Strobe.
I borrowed some metallic objects from an industrial designer friend of mine (brushed or polished anodized aluminum) and did some practice.
I had a rough time, specially with the stool that is polished and reflect everything in the surrounding.
Every objetc would have required more study and attempts. I need a lot of practise.
Here some results – straight from camera in JPG with no post production (Except the first stool pic that I turned in BW)
I generally used all three lights, 1/200 sec, f8, ISO 100
I mixed also long exposure with flashes to make the lighted buld visible.
I will apreciate any feedback
Attachments
Last edited: