Reply to thread

Message: <blockquote data-quote="Needa" data-source="post: 820175" data-attributes="member: 37799">If you auto focus mode is set to continuous it will continue to focus if the AF-on button is held and it thinks there is a need usually an slight movement of the camera. If you are set to the default AF activation and release the the button and press the shutter button it will again try to focus. To test use the AF-on button to focus o something close then recompose by pointing at something much further away and half press the shutter you will see it refocus.To change from continuous to single focus (not single point) hold the AF button to the lower left of the camera and rotate the rear command dial, it will change from continuous to single and back as it is rotated.</blockquote>