Reply to thread

Message: <blockquote data-quote="Pretzel" data-source="post: 446132" data-attributes="member: 12257">Looking up the N3 product, it shows that each set comes with one transmitter and one receiver, so not set up as transceivers (send/receive) units.  That would be why there is no tx/trx switch.  Are you sure you have a dedicated transmitter on the camera?  Also, they should have an activation button so you can test them while not on the camera, make sure it's working between units.  Does it work when testing that way?  If not, swap the units and test the other way around.  Make sure you're dealing with just one set from one box, as if you have two transmitters, or two receivers, you're stuck.I couldn't see on Yongnuo's website how they were labeled.</blockquote>