Reply to thread

Message: <blockquote data-quote="yauman" data-source="post: 252668" data-attributes="member: 15418"><p>Wait.. there's something missing here.  d-1, d-2 etc should have images you have taken and have used previously as your WB reference images.  If this is the FIRST TIME you use WB Pre, there should be NO d-1, d-2, etc images so you should not be able to select them - you cannot select a non-existing WB image.  Is that your issue?  If you have had WB images you have use previously, then d-1, d-2, d-3 etc are all your previous references (which you can custom name so instead of seeing d-1, it would read "Office" and name d-2 as "lawn" etc.)</p></blockquote><p></p>