Andy W
Senior Member
The rectangular pattern of a speedlight when used for a backdrop light doesn't look good, and the edges with the AD200 and a round reflector were too sharp. I got a 7" reflector with 20, 40 & 60 degree honeycomb grids to fit the Bowens type S mount. The V860ii was set to 24mm to avoid the rectangular shape. The light was up on a stand for these test shots about 8' from the backdrop.
20 degree:
40 degree:
60 degree:
A board to set on the floor behind the subject:
With 40 degree grid:
20 degree:
40 degree:
60 degree:
A board to set on the floor behind the subject:
With 40 degree grid: