Reply to thread

Message

<blockquote data-quote="nickt" data-source="post: 255299" data-attributes="member: 4923">I have been curious about this recently so I did some quick test shots. I&nbsp; used 1/30, 1/60, 1/200, and 1/400 shutter speed. I used auto white&nbsp; balance, but I did one additional set with white balance manually set to&nbsp; fluorescent. No difference that I could see between manually setting&nbsp; white balance or auto. I tried another set (not shown) with manual&nbsp; exposure, no noticeable difference. I don't think the fluorescents go&nbsp; dark like some led lights will if run on a rough power supply. I also&nbsp; tried a series (not shown) on my kitchen fixture. Same type bulbs as the&nbsp; shop light, but last year, I replaced the ballast with a new electronic&nbsp; ballast. No color variation over the burst at 1/400 shutter and auto wb&nbsp; was fine.[ATTACH]69358[/ATTACH][ATTACH]69359[/ATTACH][ATTACH]69360[/ATTACH][ATTACH]69361[/ATTACH]Manual WB:[ATTACH]69362[/ATTACH]</blockquote>

[QUOTE="nickt, post: 255299, member: 4923"] I have been curious about this recently so I did some quick test shots. I used 1/30, 1/60, 1/200, and 1/400 shutter speed. I used auto white balance, but I did one additional set with white balance manually set to fluorescent. No difference that I could see between manually setting white balance or auto. I tried another set (not shown) with manual exposure, no noticeable difference. I don't think the fluorescents go dark like some led lights will if run on a rough power supply. I also tried a series (not shown) on my kitchen fixture. Same type bulbs as the shop light, but last year, I replaced the ballast with a new electronic ballast. No color variation over the burst at 1/400 shutter and auto wb was fine. [ATTACH=CONFIG]69358._xfImport[/ATTACH] [ATTACH=CONFIG]69359._xfImport[/ATTACH] [ATTACH=CONFIG]69360._xfImport[/ATTACH] [ATTACH=CONFIG]69361._xfImport[/ATTACH] Manual WB: [ATTACH=CONFIG]69362._xfImport[/ATTACH] [/QUOTE]

Verification