Reply to thread

Message: <blockquote data-quote="gqtuazon" data-source="post: 313136" data-attributes="member: 6573">Re: Camera is malfunctioningI agree with your conclusions as well which is what I suspected and have mentioned on my initial post. The root cause is what we normally call "operator error".  For indoor, use a speed light or external flash. Use M mode to control the speed and aperture. Set ISO sensitivity to ISO 200 Max at ISO 3200. Set Auto ISO to "ON".  In Manual mode, use 1/60, and whatever aperture you have depending on the focal length that is being used. Like what I said, ISO 100 or 200 for indoor is going to give you a darker image unless you have a lot of lights that are turned on but I doubt it. Ideally, ISO 800 to 1,600 will be good.</blockquote>