Reply to thread

Message

<blockquote data-quote="AC016" data-source="post: 102419" data-attributes="member: 9619">You should be slightly concerned.&nbsp; I was in Ottawa last week and on Wed and Thurs, it must have been -20 or colder with the wind.&nbsp; My 5100 mis-fired twice.&nbsp; I framed the shot, pressed the shutter button and nothing.&nbsp; I looked at the LCD screen for any warnings while pressing the shutter button again and again, nothing.&nbsp; After a few seconds, the camera fired.&nbsp; Not sure exactly what froze, but something got a little to cold.&nbsp; Other than that, it worked fine.&nbsp; But do keep in mind that Nikon has environmental limits on their cameras for a reason.&nbsp; If you are going to use it in the cold, make sure you dry it out/warm it up when you bring it back inside.&nbsp; You want to let it dry out for a while before turning it back on.&nbsp; Moisture can build up inside and maybe short circuit something.I might add that my finger was so cold, i could hardly feel the shutter button, so perhaps i was not even depressing it far enough, lol.</blockquote>

[QUOTE="AC016, post: 102419, member: 9619"] You should be slightly concerned. I was in Ottawa last week and on Wed and Thurs, it must have been -20 or colder with the wind. My 5100 mis-fired twice. I framed the shot, pressed the shutter button and nothing. I looked at the LCD screen for any warnings while pressing the shutter button again and again, nothing. After a few seconds, the camera fired. Not sure exactly what froze, but something got a little to cold. Other than that, it worked fine. But do keep in mind that Nikon has environmental limits on their cameras for a reason. If you are going to use it in the cold, make sure you dry it out/warm it up when you bring it back inside. You want to let it dry out for a while before turning it back on. Moisture can build up inside and maybe short circuit something. I might add that my finger was so cold, i could hardly feel the shutter button, so perhaps i was not even depressing it far enough, lol. [/QUOTE]

Verification