Reply to thread

Message: <blockquote data-quote="Just-Clayton" data-source="post: 40630" data-attributes="member: 6495">i have the same camera. if you have it in apeture mode and you use the thumb dial to change the value of apeture, you will notice that the speed value adjusts to the apeture. if there isnt enough light the camera tells you. if there isnt enough light for the apeture setting it has to lower the speed to capture that light. with lower speed you are going to get blur. now try the same with a flash you will notice the speed increases so the picture wont get washed out from the flash.heres my quick example. In the first picture the apeture is set at 5.6 and my speed sets to LO and also tells me subject is too dark. (notice the blur )second shot is also set at apeture 5.6. now i have turned on my flash it changes the speed to 1/60Give that a try.</blockquote>