Reply to thread

Message

<blockquote data-quote="AxeMan - Rick S." data-source="post: 89995" data-attributes="member: 1746">I would have to set it up again and see.&nbsp; I been all over the place with settings so looking right now I don't know if the settings I left on the camera and flashes were the one that worked.&nbsp;I know for sure that I was in this setting, not sure on the groups, but I can tell you changing groups in camera had no effect on the out come because it was all tried, I think.&nbsp;D90f/81/60th secondCommander mode:Built in flash = --&nbsp; (This should fire off the flashes, ok at least the SB700 for sure)Group A (? Don't know)Group B (? Don't know)Channel 1&nbsp;SB700Remote ModeGroup AChannel 1&nbsp;Both TT560'sS1 (I would guess this stand for Slave one,&nbsp; my other choice is &quot;S2&quot; and &quot;M&quot;)&nbsp;To save time I lifted this photo off the web of the TT560'snot much of a choice here to chose from as you can see.[ATTACH]20806[/ATTACH]&nbsp;I did come across a configuration that all three flashes do fire, (ok, they are all working together) but I can almost see by eye the TT560's firing off just before the SB700 and the photo proves it.&nbsp;I also tried turning and moving all the speedlights so the sensors were facing the camera.&nbsp; No matter how close or far away or apart, I get the same results, the camera is only capturing the SB700's flash no matter where or how the speedlights are placed.&nbsp;I wish Curt was still active, he has the same flash and I thought he got them to sync up together, but I'm not sure if he did it buy CLS or radio triggers.&nbsp;I guess in the long run radio triggers will be better, I was just hoping to take advantage of the commander mode for now.</blockquote>

[QUOTE="AxeMan - Rick S., post: 89995, member: 1746"] I would have to set it up again and see. I been all over the place with settings so looking right now I don't know if the settings I left on the camera and flashes were the one that worked. I know for sure that I was in this setting, not sure on the groups, but I can tell you changing groups in camera had no effect on the out come because it was all tried, I think. D90 f/8 1/60th second Commander mode: Built in flash = -- (This should fire off the flashes, ok at least the SB700 for sure) Group A (? Don't know) Group B (? Don't know) Channel 1 SB700 Remote Mode Group A Channel 1 Both TT560's S1 (I would guess this stand for Slave one, my other choice is "S2" and "M") To save time I lifted this photo off the web of the TT560's not much of a choice here to chose from as you can see. [ATTACH=CONFIG]20806._xfImport[/ATTACH] I did come across a configuration that all three flashes do fire, (ok, they are all working together) but I can almost see by eye the TT560's firing off just before the SB700 and the photo proves it. I also tried turning and moving all the speedlights so the sensors were facing the camera. No matter how close or far away or apart, I get the same results, the camera is only capturing the SB700's flash no matter where or how the speedlights are placed. I wish Curt was still active, he has the same flash and I thought he got them to sync up together, but I'm not sure if he did it buy CLS or radio triggers. I guess in the long run radio triggers will be better, I was just hoping to take advantage of the commander mode for now. [/QUOTE]

Verification