Reply to thread

Message

<blockquote data-quote="Don Kuykendall_RIP" data-source="post: 512642" data-attributes="member: 6277">
<ol>
<li data-xf-list-type="ol">Go to ISO sensitivity Settings</li>
<li data-xf-list-type="ol">Set ISO Sensitivity to 100 ISO (This is always what I do)</li>
<li data-xf-list-type="ol">Set Auto ISO sensitivity to ON</li>
<li data-xf-list-type="ol">Set Maximum Sensitivity (to whatever you want it to not go over.)</li>
<li data-xf-list-type="ol">Set Minimum Shutter Speed to Auto (Use the Multi select button around the OK button and click to the right to bring up the submenu go up or down till you hit AUTO.&nbsp; You Can hit the right once more when you get to AUTO and decide if you want slow or fast. I would suggests you leave it in the middle. That actually set it at 1.5 times the length of the lens.</li>
</ol>What I like about this setting is that lets say you have your 70-300 on the camera. You are at 70mm then the camera will use 1/105 as the lowest shutter speed. You then zoom in to 300 the camera will set 1/450 as the lowest shutter speed. I can and will use a higher speed if the conditions are right depending on how you camera is set though.&nbsp;&nbsp; Now if you just don't have enough light and you don't have your ISO set high enough it will shoot lower so you have to watch for that.&nbsp; But that is your fault and not the cameras</blockquote>

[QUOTE="Don Kuykendall_RIP, post: 512642, member: 6277"] [LIST=1] [*]Go to ISO sensitivity Settings [*]Set ISO Sensitivity to 100 ISO (This is always what I do) [*]Set Auto ISO sensitivity to ON [*]Set Maximum Sensitivity (to whatever you want it to not go over.) [*]Set Minimum Shutter Speed to Auto (Use the Multi select button around the OK button and click to the right to bring up the submenu go up or down till you hit AUTO. You Can hit the right once more when you get to AUTO and decide if you want slow or fast. I would suggests you leave it in the middle. That actually set it at 1.5 times the length of the lens. [/LIST] What I like about this setting is that lets say you have your 70-300 on the camera. You are at 70mm then the camera will use 1/105 as the lowest shutter speed. You then zoom in to 300 the camera will set 1/450 as the lowest shutter speed. I can and will use a higher speed if the conditions are right depending on how you camera is set though. Now if you just don't have enough light and you don't have your ISO set high enough it will shoot lower so you have to watch for that. But that is your fault and not the cameras [/QUOTE]

Verification