Reply to thread

Message

<blockquote data-quote="pedablue" data-source="post: 704403" data-attributes="member: 46301">Please let me know, if anyone has this combination or did a test on the same.I recently got my Z6 (Loving it!) and I had the Tamron lens (AF A022N 700) already before.Did the firmware update which should give compatibility with the Z6/Z7 via Tap In console, but still the lens is giving errors 98% of time.It seems as there would be a communication issue - as the aperture is not showing most of the time before the camera goes into Error mode.I tested the FTZ adapter with other lenses (also a Tamron 18-400) - works fine - no problem.Tested it with fully charged battery - no change. Switched off the image stabilization on the optics - again no change.If anyone has any advise for me in other settings I could try, I would be grateful.Thanks</blockquote>

[QUOTE="pedablue, post: 704403, member: 46301"] Please let me know, if anyone has this combination or did a test on the same. I recently got my Z6 (Loving it!) and I had the Tamron lens ([FONT=Arial][COLOR=#333333]AF A022N 700) already before.[/COLOR][/FONT] [FONT=Arial][COLOR=#333333]Did the firmware update which should give compatibility with the Z6/Z7 via Tap In console, but still the lens is giving errors 98% of time.[/COLOR][/FONT] [FONT=Arial][COLOR=#333333]It seems as there would be a communication issue - as the aperture is not showing most of the time before the camera goes into Error mode.[/COLOR][/FONT] I tested the FTZ adapter with other lenses (also a Tamron 18-400) - works fine - no problem. Tested it with fully charged battery - no change. Switched off the image stabilization on the optics - again no change. If anyone has any advise for me in other settings I could try, I would be grateful. Thanks [/QUOTE]

Verification