Reply to thread

Message: <blockquote data-quote="Rick M" data-source="post: 118322" data-attributes="member: 4399"><p>Sounds like you have a lot of dust in the camera body. During one of times I used the blower, I set up the crevice tool from my vacuum in a vice and put it about 6 inches from the camera body. I blew the inside out with my blower while the vacuum was on. I repeated with the mirror up and blew off the low pass filter. I don't get repeat build up like that anymore. I think these were shipped with excessive dust in the body and static charges are attracting the dust to the sensor. I don't think just cleaning the sensor is enough, that's why I haven't had my local shop mess with it.</p></blockquote><p></p>