Reply to thread

Message: <blockquote data-quote="WayneF" data-source="post: 374066" data-attributes="member: 12496">Sure, you can use the modeling lights on studio lights.  Just don't trigger the flash (pull the sync cord, or remove the triggers).   Or the inexpensive clamp on work reflectors ($10 class, hardware departments) would be the same thing.   150 watt incandescents won't be bright though..   modeling lights at  f/8, 1/200, IS0 100 at three feet is likely a black picture.  So called modeling lights on speedlights is just many low power flashes, like HSS.  It would be much less bright than any full flash.</blockquote>