Reply to thread

Message

<blockquote data-quote="Krs_2007" data-source="post: 258697" data-attributes="member: 12948"><img src="http://gallery.nikonites.com/gallery/files/1/2/9/4/8/img_0369.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />&nbsp; Sorry for the bad phone pic, but sitting on a conference call. So this is the farm laying on its side, the legs in the middle keep the frame from tipping over backwards.So here is the parts list7 - 1/2 x 24&quot; PVC pipe4 - 90 degree elbows2 - 45 degree which you can see right by the legs2 - T's to allow for the legsI havent glued any of it because I want use it first to make sure its the way I like it.&nbsp; But I eventually want to be able to break it down and store out of the way. Material is almost denim and its the thickest I could find.&nbsp; Might look for another type but for now it works.&nbsp; I bought 2 yards.So it only takes 6 long pieces to make it, so the 7th piece is for the little pieces for the legs.I know this may be clear as mud, but if you take a look at this table at BH then you can get the idea of what i did.&nbsp; I just dont have legs because this will be a table top version.<a href="http://www.bhphotovideo.com/c/product/929866-REG/impact_sts_mt_shooting_table_set.html" target="_blank">&nbsp; &nbsp; Impact&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; STS-MT Mastertop Shooting Table&nbsp;&nbsp; </a></blockquote>

[QUOTE="Krs_2007, post: 258697, member: 12948"] [IMG]http://gallery.nikonites.com/gallery/files/1/2/9/4/8/img_0369.jpg[/IMG] Sorry for the bad phone pic, but sitting on a conference call. So this is the farm laying on its side, the legs in the middle keep the frame from tipping over backwards. So here is the parts list 7 - 1/2 x 24" PVC pipe 4 - 90 degree elbows 2 - 45 degree which you can see right by the legs 2 - T's to allow for the legs I havent glued any of it because I want use it first to make sure its the way I like it. But I eventually want to be able to break it down and store out of the way. Material is almost denim and its the thickest I could find. Might look for another type but for now it works. I bought 2 yards. So it only takes 6 long pieces to make it, so the 7th piece is for the little pieces for the legs. I know this may be clear as mud, but if you take a look at this table at BH then you can get the idea of what i did. I just dont have legs because this will be a table top version. [URL="http://www.bhphotovideo.com/c/product/929866-REG/impact_sts_mt_shooting_table_set.html"] Impact STS-MT Mastertop Shooting Table [/URL] [/QUOTE]

Verification