Reply to thread

Message

<blockquote data-quote="Ad B" data-source="post: 516003" data-attributes="member: 37491">Hi,thanks to Carter Bouslaugh's help from Camera Cottage (USA), I could disassemble the upper axle.I also disassembled the lower pivot point again and cleaned it from the copper grease.I greased everything with Teflon based oil/grease and assembled everything.Here are my parts:<img src="https://farm6.staticflickr.com/5689/23220286923_7925270125_b.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />I drilled a tiny hole into the logodisk and with a wood screw, I could remove that disk.And disassemble the rest.I made a film with the end result...(if you click the link under the picture you can see the film).&nbsp;<a href="https://flic.kr/p/BLLRdr" target="_blank"><img src="https://farm6.staticflickr.com/5682/23479163189_af2a7121f9_b.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a>&nbsp;<a href="https://flic.kr/p/BLLRdr" target="_blank">Nest NT-530H Gimbal head after cleaning and greasing</a> by <a href="https://www.flickr.com/photos/ad_b/" target="_blank">Ad v.d. Biggelaar</a>, on FlickrAs you can see I didn't assemble the little bolt and logo disk. I've done that afterwards...Nów I'm happy with my new tripod and gimbal head.Ad B</blockquote>

[QUOTE="Ad B, post: 516003, member: 37491"] Hi, thanks to Carter Bouslaugh's help from Camera Cottage (USA), I could disassemble the upper axle. I also disassembled the lower pivot point again and cleaned it from the copper grease. I greased everything with Teflon based oil/grease and assembled everything. Here are my parts: [IMG]https://farm6.staticflickr.com/5689/23220286923_7925270125_b.jpg[/IMG] I drilled a tiny hole into the logodisk and with a wood screw, I could remove that disk. And disassemble the rest. I made a film with the end result... (if you click the link under the picture you can see the film). [URL="https://flic.kr/p/BLLRdr"][IMG]https://farm6.staticflickr.com/5682/23479163189_af2a7121f9_b.jpg[/IMG][/URL] [URL="https://flic.kr/p/BLLRdr"]Nest NT-530H Gimbal head after cleaning and greasing[/URL] by [URL="https://www.flickr.com/photos/ad_b/"]Ad v.d. Biggelaar[/URL], on Flickr As you can see I didn't assemble the little bolt and logo disk. I've done that afterwards... Nów I'm happy with my new tripod and gimbal head. Ad B [/QUOTE]

Verification