Reply to thread

Message: <blockquote data-quote="Horoscope Fish" data-source="post: 211635" data-attributes="member: 13090">That's covered in the manual. S1 and S2 are "Slave" modes for when you want to use the flash off-camera/with a remote trigger.The easiest way to get started using your '468-II is to put the flash in TTL mode and your camera in "A"perture Priority mode. If you haven't changed the default settings in your camera's menus you should be good to go from there. These may not be the IDEAL settings for every shot but it will get you started in the right direction. Learning to bounce your flash off the ceiling will help soften shadows and give a more even look to your flash exposures......</blockquote>