Reply to thread

Message: <blockquote data-quote="nickt" data-source="post: 630964" data-attributes="member: 4923"><p>Since what you are looking at is an exposure meter, what you see depends on your settings and light. So depending on what you set, it may never go to both extremes with exposure comp. In other words, if the settings and light give your meter a huge under or over exposure, the meter is going to be pegged one way or another no matter what you do with exposure comp. Use appropriate settings for the scene (and manual iso for simplicity) and you should see the full swing. If in A, S or P, the meter should be zero with a normal scene. Then adjust comp and watch the meter go either way. If in manual, adjust the settings for 0 on the meter, then play with the comp and you should see the meter go either way. You still could run into a wall, depending on settings and if the aperture has room to move to make the desired exposure.</p></blockquote><p></p>