Reply to thread

Message

<blockquote data-quote="PabloSRT8" data-source="post: 106474" data-attributes="member: 12585">Hi, I also have the left focus problem on my D800, I work 3 minutes away from Nikon Melville so I went to their service counter.My camera repair was enter as a B1 repair and not B2.I got it back two days ago and I'm now furious.The left focus looks ok, but now my center focus is so off that a +20 fine-tune adjustment barely makes it in focus.Before this, my 24-70 2.8 has a fine-tune value of ZERO and the focus was perfect. I knew I should have left my D800 alone, but since people were having success with their repairs I decided to bring it in.Im bringing it back to them, with a letter explaining what's going on.Also, letting them know that Dutch Nikon did the following repair to have a D800 successfully align:Align the sensor and bayonetDetermine and set the distance of the sensor to the bayonetAdjust the angle and of the first and second mirrorStraighten the AF CAM moduleDetermine the relative displacement of the AF points by softwareAF-fine tune lensesFinal checksI hope this helps them because I don't think they know what they are doing there.</blockquote>

[QUOTE="PabloSRT8, post: 106474, member: 12585"] Hi, I also have the left focus problem on my D800, I work 3 minutes away from Nikon Melville so I went to their service counter. My camera repair was enter as a B1 repair and not B2. I got it back two days ago and I'm now furious. The left focus looks ok, but now my center focus is so off that a +20 fine-tune adjustment barely makes it in focus. Before this, my 24-70 2.8 has a fine-tune value of ZERO and the focus was perfect. I knew I should have left my D800 alone, but since people were having success with their repairs I decided to bring it in. Im bringing it back to them, with a letter explaining what's going on. Also, letting them know that Dutch Nikon did the following repair to have a D800 successfully align: Align the sensor and bayonet Determine and set the distance of the sensor to the bayonet Adjust the angle and of the first and second mirror Straighten the AF CAM module Determine the relative displacement of the AF points by software AF-fine tune lenses Final checks I hope this helps them because I don't think they know what they are doing there. [/QUOTE]

Verification