Reply to thread

Message

<blockquote data-quote="RockyNH_RIP" data-source="post: 141554" data-attributes="member: 10784">Again, thanks to all who responded and shared info on there D5100.&nbsp; Here is the little test I ran at work today...Set the camera to ISO 6400, AP, f/5.6 S = 1/200.&nbsp; Used the 18-105 at 80mm shooting out my office door to the lab.This is the original uncropped image...[ATTACH]34000[/ATTACH]I did auto exposure and crop in lightroom, copied all settings to the other 3 and those are the only adjustments.Hi Iso NR = OFF...................................................Hi ISO NR =Low[ATTACH]33999[/ATTACH]&nbsp;&nbsp; [ATTACH]34001[/ATTACH]Hi Iso NR = Nrmal...................................................Hi ISO NR =High[ATTACH]34002[/ATTACH]&nbsp;&nbsp; [ATTACH]34003[/ATTACH]On close examination and zooming in on the under desk area and also the doorknob..&nbsp; I really did not see any appreciable difference from the settings..&nbsp;&nbsp; I even went from direct from OFF to HIGH and no real difference.&nbsp;&nbsp; It is not at this point anything I would worry about.Pat in NH</blockquote>

[QUOTE="RockyNH_RIP, post: 141554, member: 10784"] Again, thanks to all who responded and shared info on there D5100. Here is the little test I ran at work today... Set the camera to ISO 6400, AP, f/5.6 S = 1/200. Used the 18-105 at 80mm shooting out my office door to the lab. This is the original uncropped image... [ATTACH=CONFIG]34000._xfImport[/ATTACH] I did auto exposure and crop in lightroom, copied all settings to the other 3 and those are the only adjustments. Hi Iso NR = OFF...................................................Hi ISO NR =Low [ATTACH=CONFIG]33999._xfImport[/ATTACH] [ATTACH=CONFIG]34001._xfImport[/ATTACH] Hi Iso NR = Nrmal...................................................Hi ISO NR =High [ATTACH=CONFIG]34002._xfImport[/ATTACH] [ATTACH=CONFIG]34003._xfImport[/ATTACH] On close examination and zooming in on the under desk area and also the doorknob.. I really did not see any appreciable difference from the settings.. I even went from direct from OFF to HIGH and no real difference. It is not at this point anything I would worry about. Pat in NH [/QUOTE]

Verification