Reply to thread

Message: <blockquote data-quote="FLATSIX" data-source="post: 635270" data-attributes="member: 43971">Hallo Stan,Flash shows TTL BL - camera is set to TTL-mode. When using shutter speed priority = S with shutterspeeds below 1/250 = the same result.Display of camera shows all the time iso400 - except when pointed to very bright scenes, then it droppes under iso400. And takes picture at that reading.Otherwise : whatever I set for shutterspeed : vieuwfinder shows always iso400 - on the other hand I have no clou at what iso picture will be made : it could be iso400, it could be my max. iso setting of 8000? Camera does not tell me nothing.Before, at that party-shoot, I am almost certain that with flash the camera showed me the iso-values (the same as without flash) - so I could anticipate and lower my proposed iso-setting by changing aperture or slower shutter speed. It appaers to me that suddenly now this has changed by showing me now constantly iso400 in the vieuwfinder and then taking pictures at very high iso-numbers without warning me.All my settings should be good - I did not change any. I also have that e-book for the D500 with the 990 pages - I read this carefully so I know most of the possibilities and settings of the D500. In that 990 pages book they do not tell what you should see in the viewfinder with auto-iso on and flash on (that is a pity).So I still think that there is a malfunction of the D500 in my possession - and some others too ??......</blockquote>