Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Learning
Videography
D3300 to produce short business videos indoors
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="aroy" data-source="post: 521166" data-attributes="member: 16090"><p>. 50 is where you use PAL and 60 for NTSC. I guess that in Europe and India it is PAL, so 50. You can always change to 60. I prefer to use highest frame rate, as it can be used for slow motion if required. Any way you can reduce the frame rate to 30 or 24 in PP.</p><p>. Varying light is due to camera adjusting exposure in realtime. For constant exposure use manual exposure - M on the top dial. Just set the camera to A, ISO to say 400 and aperture to what you want. That will show the exposure speed. If it is too low (< 1/100) then adjust the aperture or ISO to get at least 1/100 sec.</p><p>. Make sure that the ISO is also fixed, else the camera will change it, if there is insufficient light.</p><p>. If you want everything in focus use higher apertures - F5.6 to F8, but that needs good light. If you want that shallow DOF then use F1.8. I normally use F1.8 with my 35mm F1.8DX. That gives me plenty of shutter speed indoors at ISO 400.</p></blockquote><p></p>
[QUOTE="aroy, post: 521166, member: 16090"] . 50 is where you use PAL and 60 for NTSC. I guess that in Europe and India it is PAL, so 50. You can always change to 60. I prefer to use highest frame rate, as it can be used for slow motion if required. Any way you can reduce the frame rate to 30 or 24 in PP. . Varying light is due to camera adjusting exposure in realtime. For constant exposure use manual exposure - M on the top dial. Just set the camera to A, ISO to say 400 and aperture to what you want. That will show the exposure speed. If it is too low (< 1/100) then adjust the aperture or ISO to get at least 1/100 sec. . Make sure that the ISO is also fixed, else the camera will change it, if there is insufficient light. . If you want everything in focus use higher apertures - F5.6 to F8, but that needs good light. If you want that shallow DOF then use F1.8. I normally use F1.8 with my 35mm F1.8DX. That gives me plenty of shutter speed indoors at ISO 400. [/QUOTE]
Verification
Post reply
Forums
Learning
Videography
D3300 to produce short business videos indoors
Top