3D Tracking

Kelly Q

Kelly Q

New member
I tried to put my camera in 3D tracking, but when I go through the menu (push button on left and scroll with sub command dial) all the other modes come up, but 3D doesn't. What's up?
 
BF Hammer

BF Hammer

Senior Member
You are set at AF-S which will only set focus once at AF-on button activation. You need to be on AF-C (continuous focus adjustment) or AF-A (auto selection of modes). Then the 3D will become an option.
 
Kelly Q

Kelly Q

New member
It was in AF-C. Very strange, I turned camera off for a while, turned on, and it started working. Changed no settings. I sent camera to Nikon a few months ago because screens were disappearing, and they said camera had no problems. I think they missed something.

Thanks.
 
Last edited:
hark

hark

Administrator
Staff member
Super Mod
Contributor
You might want to consider this electrical reset that Peter7100 shared with us a while back. I used this on my D7200 when the shutter button no longer would allow focusing. Worked like a charm!

Re: Tip - Attached lens won't autofocus

Re: Tip - Attached lens won't autofocus Not sure if this is relevant to this make/model, but on Canon body, I was able to reset things by doing the following: 1. Switch off 2. remove battery and card 3. switch on 4. Hold down the shutter for at least 15 seconds 5. switch off 6. re-install...
nikonites.com
 
Top