ND filters
- Thread starter mikew_RIP
- Start date
Fred Kingston_RIP
Senior Member
There are 3 distinct types Mike.
1. single density screw on glass
2. circular multi-density screw on glass
2. single density mylar/plastic that fits a holder (and become multi-density by adding more than one to the holder..
Each type has both cheap/expensive in their lines...
IMO... it becomes a matter of budget/compromise between the densities you want, and the type you decide on...
1. single density screw on glass
2. circular multi-density screw on glass
2. single density mylar/plastic that fits a holder (and become multi-density by adding more than one to the holder..
Each type has both cheap/expensive in their lines...
IMO... it becomes a matter of budget/compromise between the densities you want, and the type you decide on...
Thanks i had sort of thought single density screw on glass, i had heard you had to be cautious which multi density you bought and as i want it for the V2 decided there may not be much advice about for the 40.5mm size .
Fred Kingston_RIP
Senior Member
That's where the cost aspect starts to get crazy... in the odd sizes... that's why most folks I know go with the mylar/holder method... the holders can generally be sized to accommodate multiple size lenses... rather than be limited to a single lens size...
I should add to my original answer that single density screw ons can usually accommodate screwing on multiple ND filters to achieve a specific density, as long as you're aware that certain lenses start to vignette the more stuff you stack on the front of the lens...
I should add to my original answer that single density screw ons can usually accommodate screwing on multiple ND filters to achieve a specific density, as long as you're aware that certain lenses start to vignette the more stuff you stack on the front of the lens...
MartinCornwall
Senior Member
I use cheap CAMDIOX ND1000 (10 stopper) in the daylight. On a sunny day with a small aperture I can get long exposures up to 30 secs. Some cheap ND's are known for there bad colour casting but these filters give no colour casting at all and are a bargain. I think I paid about £13 for a 77mm one.
When it comes to ND stops, in some cases more is better than less. I have a ten-stopper that often isn't enough for the long exposure I try to do with my wides. Using one can already increase vignetting and in my case, with two filters my shots have that severe vignetting they'd only be usable when I crop the center out of it.
I ordered a graduated ND which only blocks one half of my shot. Like that I can capture fully or at least more of the DR a scene has, if it is a wider DR than my cam's capability. The disadvantage is that it only works well in 50/50 compositions. I don't know of other brands but B+W only has them in -1 or -2 versions. At least those I checked.
I ordered a graduated ND which only blocks one half of my shot. Like that I can capture fully or at least more of the DR a scene has, if it is a wider DR than my cam's capability. The disadvantage is that it only works well in 50/50 compositions. I don't know of other brands but B+W only has them in -1 or -2 versions. At least those I checked.
Last edited:
Not going with Cokin as for some reason the lens hood on my 10-30 is a real pig to remove and refit,i can screw filters on with it in place though
Darn.
I just found the starter kit. I'll post it here in case someone else comes looking.cokin CG800A405 | B&H Photo Video
I know you said you won't go with Cokin because of having trouble removing your hood. The nice thing with Cokin is that a graduated ND filter can be adjusted up or down allowing you to position the line where it is beneficial for your composition. If you go with a graduated screw on filter, you can only adjust the line by moving where you aim the camera.
A 9- or 10-stop ND filter will allow you smoother water than a 3-stop (or less).
A 9- or 10-stop ND filter will allow you smoother water than a 3-stop (or less).
MartinCornwall
Senior Member
Yes Mike just search the size you need on EBay. Bit of a wait from China but cheap and good quality.
I had thought about it but with it being so small i didnt think i would be able to pick up any recommendations from other users.
Thanks i dont mind the wait and i do order low value things from china,just ordered this for my macro flash build.
1/4" Screw Hot shoe mount adapter Adjustable angle pole for camera LED light | eBay
Which one did you buy? I bought a variable one a couple of years back and it was awful. I plan on buying an ND filter of some kind when I visit the camera show
I got a cheap one from amazon.uk It works for me it does soften the shot a little but its very useable.
Think its a Fotga which is a japanese brand.
see here on amazon uk.
Amazon.co.uk: 77mm filter nd - Fotga: Electronics Store
Think its a Fotga which is a japanese brand.
see here on amazon uk.
Amazon.co.uk: 77mm filter nd - Fotga: Electronics Store
Rob Bye
Senior Member
I use a Genus Eclipse variable ND filter, which is among the best of that type, but it's not the product I'd like to recommend... Whichever type or brand you decide to use, I'd like to suggest you also get Xume filter adapters. These are magnetic rings which allow you to quickly pop filters on or off your lenses. These things are a huge convenience, and I have them fitted on all my filters.
Fred Kingston_RIP
Senior Member
Just so you know Mike... Cokin makes a Universal mount for their systems... rather than a screw on holder, it's a large mount that has 3 anchor screws that mounts the holder to the exterior of the lens's barrel... They make them in the 3 sizes... A, P, and their Z series...