Federico-Nov
Senior Member
Hi, all!
I generally use Flashes in M mode, mainly in studio, but I'm interested in TTL, specially for events or socials, when you have to take an image fast.
So I bought a Yongnuo 685 and a Yongnuo 622N-TX. I read the manual and there are a couple of things that I cannot understand.
When I set the flash on my Nikon D750 with the flash in TTL mode , the preflash is almost simultaneous. When use the YN622N-TX on camera and the YN 685 off camera the delay between the shutter button press/preflash and the real flash/shutter release in noticeable. A second or something like.
When I change some setting in YN622N-TX, it will not show on YN685 display (for example flash power in manual mode). It will update only after the shoot. (This is the opposite of what I'm used with YN 560-TX with YN 560 IV. If you change something on TX it will sync immediately in 560 IV.
When YN622-TX is on camera, AF assist will work. When YN685 is on hot-shoe, AF it will work as well. If YN622-TX is mastering a YN-685, none of the two will have AF assist. Do I have to choose it manually?
Do you have any idea?
Thank you!
I generally use Flashes in M mode, mainly in studio, but I'm interested in TTL, specially for events or socials, when you have to take an image fast.
So I bought a Yongnuo 685 and a Yongnuo 622N-TX. I read the manual and there are a couple of things that I cannot understand.
When I set the flash on my Nikon D750 with the flash in TTL mode , the preflash is almost simultaneous. When use the YN622N-TX on camera and the YN 685 off camera the delay between the shutter button press/preflash and the real flash/shutter release in noticeable. A second or something like.
When I change some setting in YN622N-TX, it will not show on YN685 display (for example flash power in manual mode). It will update only after the shoot. (This is the opposite of what I'm used with YN 560-TX with YN 560 IV. If you change something on TX it will sync immediately in 560 IV.
When YN622-TX is on camera, AF assist will work. When YN685 is on hot-shoe, AF it will work as well. If YN622-TX is mastering a YN-685, none of the two will have AF assist. Do I have to choose it manually?
Do you have any idea?
Thank you!
Last edited by a moderator: