+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Junior Member

    Cannot insert Sandisc CF card

    Hi All, new the the forum. Just bought my first Nikon.

    So I have a brand new D 810. I've taken a few pics with the SD card. It looks like a very good camera.

    But, it will not accept a ScanDisk CF card. I don't have any other brand on hand to try but this is a recommended brand, yes? I've tried two cards, so that kind of rules out something wrong with the card.

    It slides in almost home but stops just short as if it is coming up against a mechanical part. It appears that the eject button is in its normal position. I have been very gentle, no force applied.

    Hopefully I'm doing something silly?

    Thanks


    › See More: Cannot insert Sandisc CF card



  2. #2
    Senior Member
    Bikerbrent's Avatar

    Re: Cannot insert Sandisc CF card

    Welcome aboard. Enjoy the ride.

    The D810 uses Type I cards (3.3mm thick). Older Type II CF cards are not supported. Are you sure you are using a Type I card?
    Brent: Poway, CA
    D7200, D200, F100
    Tokina 12-24mm
    Nikon 18-200mm
    Tokina 28-70mm f2.6-2.8
    Nikon 80-200mm f2.8
    Sigma 150-600mm
    Nikon 50 AF f1.8
    Tokina 100mm f2.8 Macro
    Nikon SB800

  3. #3
    Junior Member

    Re: Cannot insert Sandisc CF card

    See link: Nikon D810 Tutorial

    Sent from my SAMSUNG-SM-G920A using Tapatalk

  4. #4
    Junior Member

    Re: Cannot insert Sandisc CF card

    Thanks, It's a type 1 card. I don't think a type 2 wouldn't even get in the gate. This goes almost all the way home, but comes up against a hard stop stop just short of seating.

    edit: I see what the problem is. There is a tab near the bottom of the slot which is part of the mechanism which pops out the release button when the card is inserted. This mechanism is stuck. Back to Samy's.
    Last edited by kristiansolem; 06-04-2017 at 01:35 AM. Reason: New information has come to light

  5. #5
    Senior Member
    wev's Avatar

    Re: Cannot insert Sandisc CF card

    Check the back of the card and make sure one of the thin divider strips between the contacts hasn't broken or gotten bent. I had this happen with several sandisc cards. I just cut the plastic bit off (carefully) and the card would then seat and work.
    wev

    d500
    d5300 x 2
    Tamron 150-600 G2/5-6.3, Tamron 18-400mm/3.5-6.3, Tamron 90mm/2.8 macro
    Nikon 18-55mm/3.6-5.6, Nikon 55-200mm/4-5.6
    Nikon 35mm/1.8, Nikon 50mm/1.8
    Vanguard Alta Pro 263AT tripod, CP324 monopod
    SBH 100 ball head, PH 32 pan head
    SB-700 Speedlight

  6. #6
    Junior Member

    Re: Cannot insert Sandisc CF card

    Thanks wev. I figured it out and edited my post above. The problem is what appears to an easily repaired one with the camera.

  7. #7
    Senior Member
    Needa's Avatar

    Re: Cannot insert Sandisc CF card

    kristiansolem, Welcome to Nikonites. Thanks for posting the cause of the problem.


  8. #8
    Staff
    Super Mod
    Marilynne's Avatar

    Re: Cannot insert Sandisc CF card

    Welcome!

  9. #9
    Staff
    Challenge Team
    Super Mod
    RocketCowboy's Avatar

    Re: Cannot insert Sandisc CF card

    Howdy and welcome to Nikonites!


    Sent from my iPhone using Tapatalk

  10. #10
    Senior Member
    todd7500's Avatar

    Re: Cannot insert Sandisc CF card

    Hi all,
    I have a referb (Nikon) 810 on the way. I just remembered to order a CF card... (before I read this post) opinions on this one?
    I have no idea if its a type 1 or type 2,. Hope I dont need a hammer to get it in the card bay...
    I am kind of anxious to see what the resolution is like from full frame with this much mp (up from my 7500)
    Thanks as always gang!

    https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
    D810, several D80s, Nikkor, Tokina, Tamron Lenses. SB 24 and SB800 Speedlights, Ikelite Housing for the D80s, Novatron lights, Etc etc etc, PsCC. Its a slippery slope.





Quick Reply Quick Reply

If you are already a member, please login above before posting.

Similar Threads

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •