Latest D7000 firmware A:1.04 / B:1.05

jdeg

^ broke something
Staff member
Download the latest firmware for your D7000 here: https://support.nikonusa.com/app/answers/detail/a_id/19174/~/d7000-firmware-a:-1.04-/-b:1.05

What is included in this update:


  • Support for distortion control data L: 2.000 and later has been added.
  • Camera firmware must be updated before distortion control data can be updated to Ver. L: 2.000 or later.
..........
Modifications enabled with a previous upgrade of firmware, release date April 2, 2012

  • Support for the AF-S NIKKOR 800mm f/5.6E FL ED VR has been added.
Modifications enabled with this upgrade of firmware, release date November 10, 2011

  • An error where the card may not have been recognized when some memory cards were used has been addressed.
  • The following issues occurred when the mode dial was rotated from U1 or U2 to another shooting mode or from another shooting mode to U1 or U2 when the power was off or when the exposure meters are off (Auto meter-off). These issues were resolved.
    • A new folder is sometimes created despite the fact that the current folder does not yet contain 999 files and none of the files are numbered “9999”.
    • The number of remaining exposures may not be displayed as specified in the settings.
    • The setting for Role played by card in Slot 2 may change between Overflow, Backup, and RAW Slot 1- JPEG Slot 2.
  • An issue where Battery info in the setup menu sometimes showed sufficient remaining charge even when the remaining charge for the AA batteries inserted in the MB-D11 battery pack was low has been resolved.
  • An issue where a saved photo may not have been displayed properly when a movie was displayed in playback mode while saving the photo has been resolved.
  • An issue where zoom in or zoom out may not have performed properly when the playback zoom in or playback zoom out button was pressed while in Live view has been resolved.
  • The message displayed when the internal memory of the Wireless Transmitter WT-4 is formatted from the Format transmitter's memory under Device settings in Wireless transmitter of the camera’s setup menu was changed from Done to Built-in memory formatted.
  • The message displayed when the internal memory of the Wireless Transmitter WT-4 is formatted from the Format transmitter's memory underDevice settings in Wireless transmitter of the camera’s setup menu was changed from Done to Built-in memory formatted.
 

nickt

Senior Member
Just to add...

If you want it, the lens distortion control data must be downloaded separately. It can be found here:
Nikon Imaging | Global Site | Distortion Control Data version 2


This file is good for most of our Nikon DSLR's. The slightly different install can be confusing if you don't seek out the instructions. That is, the .BIN file ends up in a Nikon folder on your desktop rather than in the current folder like a regular update extraction.


Most people don't use the in-camera lens correction anyway.
 
Top