Experimenting

Scott Murray

Senior Member
Well I decided to see if I could make up a "dodgy" flash diffuser to go on my on board flash. All I used was 1 x A3 paper and a couple pieces of sticky tape. Then went out bug hunting. These are not my best but I am fairly happy with my quick and rough set up.
 

Scott Murray

Senior Member
Samples - These images had been cropped for the first framing and secondly as an extreme crop.

SHM_2244-2.jpgSHM_2244.jpg

SHM_2247-2.jpgSHM_2247.jpg

SHM_2252-2.jpgSHM_2252.jpg

SHM_2268-2.jpgSHM_2268.jpg
 

Fred Kingston

Senior Member
Scott... since the EXIF data gets stripped here... can you briefly describe the lens, and any extension tubes, bellows, etc that you used it the above shots...??
 

Scott Murray

Senior Member
Scott... since the EXIF data gets stripped here... can you briefly describe the lens, and any extension tubes, bellows, etc that you used it the above shots...??

Hi Fred the above were shot with my Tamron SP 90mm Macro, LED Ring light, A3 paper over onboard flash hanging out above front of lens. +3.0 Exp Comp

Date Time Original2013:09:22 23:01:43
Exposure Time0.003125
F Numberf / 11
Exposure ProgramManual
ISO Speed Ratings200
Metering ModeSpot
FlashFlash fired, compulsory flash mode, return light detected
Focal Length90mm
White BalanceAuto white balance
MakeNIKON CORPORATION
ModelNIKON D800E
LensInfo900/10 900/10 28/10 28/10
LensModel90.0 mm f/2.8
Lens90.0 mm f/2.8
 

Fred Kingston

Senior Member
Scott... does the on-board flash fire when the ring light fires??? Or are you just working through solutions to

on-board flash

or

Ring light flash...

​?????
 
Top