Preset white balance

Eduard

Super Mod
Staff member
Super Mod
On my D300, the d-0 white balance value remains until I change it. I believe the D200 operates in the same manner.
 

nikonist

New member
My D200 resets the WB when the 2 green buttons are pressed simultaneously for about 3 seconds.
Initially, the WB is set to 0 which is AUTO. If you press the WB button and click the dial 8 times to the right, that's when you get to the D-0 preset. (Confirm by pressing WB button alone - you should still be in D-0 WB mode).

Do the camera reset by pressing the 2 green button on top of your D200 (simultaneously for about 3 seconds until you see the LCD blink). Then confirm the reset by pressing the WB button alone and you should be back to WB Auto which is 0 on your LCD.

Hope this helps.
 
Top