Recent content by Fred Kingston

He's correct...just make sure you understand the interface those M.2 chips sit in... as far as heat dissipation and cooling. They run hot. REAL hot. :(

What does "retail automation" mean within the context of your post?

I've used them for a few years now... I've replaced about a dozen different Mac and Mac Laptop drives with Crucial SSDs... They're pretty good about having videos that show step-by-step process in replacing drives with their SSDs

I have the Z7II and haven't looked back... I sold almost 50 years of Nikon F mount stuff. and kept a 55mm AIS f1.2 out of the whole lot... Move forward....

Congratulations @NestorStura

Get a USB-C hub and you can daisy chain 255 USB devices

As we speak, I'm in the process of integrating a new Seagate 8T drive... As to your question regarding SSD speed. Yes, they're fast. Very fast, when directly connected to a very fast USB port... those speeds drop off considerably when daisy-chained out thru a hub,,, I chose a Seagate Ironwolf...

Here's a video... Should be about the 6 minute mark in the video...

Interesting... Just tried my Z7II and it won't fire in Silent mode either... "You can't hear me, but I'm gonna flash this big honkin' light in your eyes"... I've tried S mode a few times and always go back to regular... I find myself spending more time checking and double checking my camera...

You needed to do a self-portrait reflection in all that glass in B&W. ala Vivian Maier

Correct @Needa In that case, Refer to Page 134 of the User Manual... Go to the SetUp Menu, and select the first option to Reset the Setup Menu... Think of this as an opportunity to upgrade to a better camera... :D

I would start with a hard reset of the camera. There are 2 Green dots on the camera next to buttons... With the camera ON, hold the 2 buttons next to the green dots down until you see the LCD screen on the top blink... If this works, you're golden, and you'll need to go through some of your...

If there's a black bar at the top of your image AND you're using flash, you're using the wrong Flash Sync speed for that camera. If there are black bars at the top and bottom of your screen, the aspect ratio is set to 16:9... Change the camera's aspect ratio. If the above conditions are not...