ERR code blinking but camera works on Manual mode

moizdhansura

New member
i told my cousin to buy me D750 from Dubai, when i opened it, it started to blink ERR on the screen. so i tried different modes it didnt work in any of the modes Except Manual. what might be the reason for this if anyone could help me out
 

Horoscope Fish

Senior Member
i told my cousin to buy me D750 from Dubai, when i opened it, it started to blink ERR on the screen. so i tried different modes it didnt work in any of the modes Except Manual. what might be the reason for this if anyone could help me out
What lens, specifically, do you have mounted?
 

Bikerbrent

Senior Member
Welcome aboard. Enjoy the ride.
We look forward to seeing more posts and samples of your work.

Return it if possible. If nothing else your should be able to send it back to your cousin for an exchange. Have hime at least mount a lens and turn on the camera before leaving the store.
 
Last edited:

nickt

Senior Member
Make sure your lens is compatible. There is a compatibility chart in your manual. Make sure your lens is seated properly, give it a twist in both directions to make sure its mounted properly.

Try no lens at all on the camera. With no lens installed and camera in Manual mode, you should not get an error and you should be able to set a shutter speed and activate the shutter even though there is no lens installed. If you get an error in manual mode with no lens, something is wrong with the camera.
 

mikew_RIP

Senior Member
Welcome to the forum hope its nothing much, sometimes with new gear we see something and then worry too much, if it worked in manual there is a chance its a settings thing.
 
Top