D7200 SD Card

06Honda

Senior Member
I have been using a SanDisk Extreme 60 MB/s' SD XC 64 GB which was always a fast card and worked nicely with my body. Last shoot when I inserted it into my mac is shown no images on it, but the backup card did. I had the cards setup correclty in my memu so my guess is the card just died. So my question is since using older SD cards the viewing in camera and deleting has slowed down alot, so my guess is the cards are not quite fast enough for the D7200 but do take and store images. Is the MB/s' number important when buying. What is a good SD Card to get, I have always used SanDisk but have seen another brand out their called Lexar. Any suggestions, thanks.

Paul
 
Last edited:

Fred Kingston

Senior Member
I would do a full format in a computer with your cards, then do a camera format in the camera and use what you've got after testing. SD cards are fairly resilient, and rarely simply die.
 

Fred Kingston

Senior Member
Just for reference... Be sure you search for "Formatting an SD card on a Mac".

You want to use the Disk Utility in the Utilities folder, and you want to pay attention to the file structure drop down options... You want Fat32 for 32G or smaller cards, and ExtFat32 for cards larger than 32G...

Good luck...
 

lokatz

Senior Member
So my question is since using older SD cards the viewing in camera and deleting has slowed down alot, so my guess is the cards are not quite fast enough for the D7200 but do take and store images. Is the MB/s' number important when buying. What is a good SD Card to get, I have always used SanDisk but have seen another brand out their called Lexar.

Paul, SanDisk is not a bad choice, especially since Lexar's past owner, Micron, just sold the brand to a largely unknown outfit called LongSys. Let's get something clear, though: the write speed of the card determines the continuous shooting speed of your camera once it filled up its internal buffer, so a faster card means more pictures per second or minute. However, the speed of the card has nothing to do with the issue you ran into. A card failure is a fairly rare thing but happens at times. It is no more likely to occur on a D7200 than on any slower camera, though - any camera will wait for the image writing to complete, and the card directory to be updated accordingly, before starting to write the next one. (Again, that is after the camera first filled up its internal memory buffer, which is much faster than any external card could be and thus allows for very high shooting speeds until that buffer is full.)

Here is some fairly old information about card write speeds with the D7200. What it tells you is that if you care about write speed = continuous shooting speed, getting a card spec'd at 95 MB/s will be advantageous. These cards usually also show a "UHS-I" marking, the faster standard your D7200 supports, and have become fairly cheap anyway.

Happy shooting!
 
Last edited:

lokatz

Senior Member
As FredKingston suggested, use Fat32 for 32G or smaller cards and ExtFat32 for larger ones. However, I see absolutely no benefit in formatting the card on your computer over doing so in your camera, so my recommendation is to do the latter.
 
Top