problem in autofocusing & shooting nikon d7100 V.strange

A

Ahmed J Barznji

New member
hi...
before couple of days every thing was ok i toked some photos normally at night
when i waked up in the morning i found something very strange :
the camera can not auto-focusing correctly ... cannot recognize the auto-focus
i tried every thing you can imagine like changing the lens or reset even re-update the firmware
not focus nor shooting in auto-focus mode when use viewfinder but it normally work when uses the LCD
in this video you will see whats going on with me ...

note: i don't know why the speed shutter & aperture blinking in auto mode !?

 
D

dave42

Senior Member
It looks like that in auto with no flash the shutter and aperture indicators flash. ISO speed is set at auto. I'm saying this without looking, but I think there is a setting that you can set the limit the ISO can go to. Perhaps that setting is off a bit.. needs to be raised to a higher limit.

Shooting menu>ISO sensitivity settings

But I saw the ISO was 400 on the flash pic. .... Good luck!
 
S

salukfan111

Senior Member
dave42 said:
It looks like that in auto with no flash the shutter and aperture indicators flash. ISO speed is set at auto. I'm saying this without looking, but I think there is a setting that you can set the limit the ISO can go to. Perhaps that setting is off a bit.. needs to be raised to a higher limit.

Shooting menu>ISO sensitivity settings

But I saw the ISO was 400 on the flash pic. .... Good luck!
Click to expand...
Go into the Shooting Menu --- ISO sensitivity settings ----auto iso sensitivity -- off
Don't let your camera be the boss of you.
 
Top